WEH Check Valve TVR2 with internal thread G3/8″ on both sides, DN 14 mm, stainless steel, cone seal

Information

  • Stainless steel
  • High leak tightness
  • Seals are protected from the media flow
  • Wear and corrosion resistant
  • Low-noise opening and closing
  • Low cracking pressure – starting from 0.01 bar
  • Max. operating pressure – up to 1000 bar
Enquire

Description

The WEH check valves are out of stainless steel and especially designed for both liquid and gaseous media. The check valve system is designed to minimize the effect that dirt particles have on the components. Due to the sleek, internal aero-dynamic design of the check valve, chatter and flow restriction is greatly reduced.

The check valves are available as standard solution with double ferrule fittings for pipe diameters 6 mm up to 50 mm.

All check valves are made from stainless steel. In addition to our extensive standard check valve product range we also develop customer-tailored solution to your specific needs. Please contact us!

Check valve WEH TVR2 is equipped with a FKM seal. Other sealing materials on request. It is the customer‘s responsibility to clarify the media compatibility

Features

  • Stainless steel
  • High leak tightness
  • Seals are protected from the media flow
  • Wear and corrosion resistant
  • Low-noise opening and closing
  • Low cracking pressure – starting from 0.01 bar
  • Max. operating pressure – up to 1000 bar

Technical Data

Nominal bore (DN)14 mm
Max. allowable operating pressure PS400 bar (5,000 psi)
Cracking pressure PCApprox. 0.1 bar
Temperature range-20 °C up to max. +120 °C
Housing materialStainless steel
Up to DN 8 mm, some inner parts brass.
Spring materialStainless steel
Sealing material DWFKM
LubricantKrytox® GPL 202
Sealing conceptCone seal
DirectiveCertified quality assurance system according to the pressure equipment directive 2014/68/EC
Media inlet B1G3/8" internal thread
Media outlet B2G3/8" internal thread
Leak rate1 x 10-4 mbar x l/s
Flow DirectionB1 -> B2
AvailabilityWEH® Ready-Made
Part No.C20002

Application

TVR2 check valves are for use with liquid and gaseous media. The WEH check valves can be used for a large range of applications in mechanical engineering and construction, chemical / pharmaceutical and food industry, materials-handling and medical technology etc.

Data Sheets

TVR2 Data Sheet

Enquire about this product


Need to talk to our team?

If you have a product question or would like expert advice on finding the right hydraulic system solution, please get in touch.